Why Your Clothing Brand Keeps Getting Stuck

Why Your Clothing Brand Keeps Getting Stuck

Turn mood boards, fabrics and sketches into a product brief a factory can execute.


The design direction has been discussed and reference images sent to the factory, yet questions keep coming. This does not necessarily mean execution is slow; sometimes requirements exist only in the speaker's mind. Rather than writing another extensive plan, take one garment in development and revise its most easily misunderstood statements until they are usable.

Start with ‘Make It Similar to the Reference’

A reference image conveys color, proportions, material and photographic atmosphere together, but does not automatically identify which elements must stay. Broad shoulders may come from the pattern or the model's pose; crispness may come from the material or temporary preparation. Without knowing what matters to you, recipients fill the gaps using their own experience.

First mark the features you want to convey, then state what should not be copied. For example, retain cropped proportions and three-dimensional pockets but change the collar and placket; reference the freshness of a light color but approve the actual color with a physical sample. This expresses intent without turning the entire image into a manufacturing instruction.

The following uses a casual shirt to illustrate rewriting documentation. It does not represent a real order; specific measurements, materials and construction methods still require confirmation during actual development.

The Same Requirement, Before and After Rewriting

Replace ‘A Little Looser’ with Wearing Conditions and Observable Targets

The original phrase describes a feeling: the recipient might increase the chest or lower the shoulder line. First specify the target wearer, layers and setting, then use the sample to identify the desired changes: ‘When fitted over the usual underlayer, the shoulders should fall naturally and the back should not pull noticeably during forward reach; retain the current length proportions.’

Provide available measurements with corresponding photographs. Without data, first arrange a fitting with a clear purpose. Do not enter unverified figures as final specifications merely to fill a form. Distinguish garment measurements from body measurements so body circumference is not used directly as a flat garment measurement.

Replace ‘Better Cotton’ with Comparable Candidate Criteria

‘Better’ may mean soft, crisp, clean-surfaced or stable after care. Select the targets most important to the product, then ask the supplier for comparable swatches. For a shirt, separately assess transparency, placket support, sitting creases and post-wash appearance. State the intended care requirements in advance too.

There need not be a single fabric answer at the start. Record sample A's strengths and unacceptable aspects, do the same for B, then decide whether a combination of their attributes is needed. Posting photographs of two swatches in a group chat cannot replace comparing hand feel and actual sewing performance.

Replace ‘A More Refined Pocket’ with the Problem Location and Scope

An uneven pocket opening, wavering topstitching and an overly soft pocket body are different problems. Describe the observation before deciding whether to change the process, material or structure. If the issue is simply visual neatness, changing the pocket shape may add work without improving manufacturing consistency.

Compare approved and pending sample panels from the same angle and explain where the differences lie. Relevant technical staff should confirm the final construction method against materials and equipment. Design can approve the visual target without setting every machine parameter for the production floor.

How to Continue When Requirements Cannot All Be Finalized at Once

A usable brief can contain pending items. Identify which tasks depend on each instead of treating every blank as a reason to stop. An undecided collar affects collar patterns and trim choices; undecided hangtag wording usually does not prevent the first fit review. They should not receive equal urgency.

Write pending items as questions rather than nouns. ‘Fabric pending’ is too broad; ‘Compare partial samples to establish which of two candidate fabrics maintains the target placket appearance’ explains how to proceed. Include a completion condition: can the decision follow panel review, or must it wait until the whole garment has undergone care?

Narrow the scope when choices depend on one another. If collar shape depends on fabric support, there is no need to develop every color at once. If the target material is clear, stabilize the collar in a representative color first. Narrowing enables valid comparison; it must not conceal unvalidated substitute conditions.

What Result Should You Leave a Meeting With?

Meetings often end with ‘everyone take another look’, and the next begins with the same question. Classify outcomes into three groups: enough evidence to continue related work; a direction exists but further samples are needed; or current information cannot support a decision, requiring a different question or option.

Be especially specific about additional samples. Instead of ‘make another one’, state which areas change, which conditions remain and what observation will be reviewed. A placket-only issue may need a partial combination sample; changes affecting front-to-back balance still require a whole garment. Sample scope should follow the extent of the issue, not simply save a sampling fee.

Meeting notes can be short, but should directly answer the next executor's questions. Do not copy the entire chat into a document or retain only the final ‘agreed’. Observations and constraints that shaped the decision are the most valuable handover content.

How to Tell Whether the Project Is Moving Again

Progress is more than extra ticks on a task list. Look for three changes: fewer repeated explanations of the same issue, a next sample that can be checked against specific previous comments, and appropriate validation for new material or appearance changes. If every round still argues over ‘what was meant’, the requirements remain unclear.

Recognize another possibility: the information is clear but the supplier still cannot consistently achieve the target. Discuss capability fit, material feasibility or design changes instead of adding more explanation. Some problems require another approach, others different partners; documentation cannot close every capability gap.

In collaboration across languages, standardize part names, directions and construction terminology. Do not rely solely on a short automatically translated sentence. Mark the intended location on the same detail image and retain mutually understood terminology where necessary. Images locate the issue; text explains the condition and target. Together they reduce ambiguity.

Even clear requirements can be lost in transmission. For example, when sales forwards information to purchasing and purchasing forwards it to patternmaking, the annotations may be cropped out, leaving only ‘change it like this’. At important handovers, asking recipients to summarize the round's task in their own words often reveals misunderstandings earlier. This checks correct receipt of information rather than reopening the design meeting.

Usable documentation meets a simple standard: without the designer beside them adding verbal explanations, the recipient understands what to do, what to leave for now and how to assess the result. Achieve this for one garment, then reuse effective wording for the next to gradually reduce unnecessary back-and-forth.

Send Us Your Current Sample Issues

Share this article

Related reading

Keeping Garment Repeat Orders Consistent: Shade Variation, Material Batches and Process ReviewWhat to Inspect in Bulk Garments: Appearance, Measurements, Function and PackagingChoosing Printing, Embroidery and Washing: Sampling and Approving Decoration Processes